Not Sure What You're Looking For?

2019 Land Pride RC3712 Rotary Cutter

$17,281.00


Stock Image

Stock Image

New/Used
New
Availability
In Stock
Location
Olson Power & Equipment, Inc.
VIN
1278501
Stock #
21224
Title
Clean
Condition
Excellent
Year
2019
Manufacturer
Land Pride
Model
RC3712 Rotary Cutter

Overview

Dealer Insights

New Land Pride RC3712 Rotary Cutter for sale.

Image is a representative image and does not depict the exact unit for sale.

Description

The RC3712 Folding Rotary Cutter expands on the popularity of our RC2512 by offering a heavy duty 12-foot cutter. It features a 3" cutting capacity with a cut height of 1.25" to 14". The cutter is available for 540 or 1000 RPM tractors, with 4 or 6 tires in 3 sizes, and 5 hitch options. Standard equipment includes transportation lights, wing transport locks and replaceable skid shoes.

Features
  • Surpassed rugged industry standards: All Land Pride Rotary Cutters have been designed and tested and meet rigorous: voluntary testing procedures according to ISO 4254-13.
  • Factory assembled: Arrives for quick and easy set-up. Minimal time wasted setting or prepping the unit.
  • 5 Year gearbox warranty: Shows confidence in gearbox integrity.
  • Rugged heavy built gearboxes: Capable of handling heavy cutting applications.
  • Gearbox seal protection: Gearbox bottom seal protection for longer bearing life.
  • 2 Piece driveline: shields Driveline grease zerks are easier to access.
  • Low hitch weight on tractor drawbar: Ideal for smaller hp tractors by reducing the amount of weight on the drawbar.
  • Narrow A-frame hitch: Allows for a tighter turning radius.
  • Adjustable park jack angle: Park jack can be adjusted to be perpendicular to the ground.
  • Adjustable driveline hanger: Serves as support rest for the driveline when the cutter is unhooked from the tractor. Assist operator when attaching driveline to tractor power take-off shaft.
  • Input driveline: Cat. 6 CV: Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • Drivelines with slip-clutches: Cat. 4 intermediate & Cat. 4 wings, Driveline is sized right for the intended cutting capacity. Slip-clutches will slip under load to minimize twist damage to driveline profiles.
  • Zerks on end caps of cross journals: Intermediate and wing driveline cross journals are easier to grease.
  • High blade tip speed: Allows clean cutting of material.
  • 6" Blade overlap: Eliminates skipping during turns.
  • 3/16" Round stump jumper: Standard thick stump jumper material keeps damage to a minimum.
  • Smooth top design: Reduces accumulation of debris and is easier and faster to clean.
  • Top of decks are 100% welded:: Makes center decks and wing decks stronger.
  • 1/4" Sidewall thickness: Increased thickness reduces damage from objects being thrown into deck sidewalls.
  • Beveled skid shoes on wings: Reduces gouging the ground when turning.
  • LED signal lights: LED lights are bright, long lasting, and resist vibration; unlike incandescent lights.
  • Hinged wing sections: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
  • 1" Solid hinge rods: Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.
  • Wing transport lock pins: Transport lock pins will hold wings in folded position in the event of hydraulic failure.
  • Enclosed dual 1" leveling rods: Cutter pulls equally on the rear axle while traveling over rough terrain.
  • 5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
  • Drain holes in wheel rims: Allows water to drain from wheels mounted on folded-up wings.Helps prevent paint deterioration and rusting to the wheel rims.
  • Spring cushioned center-axle: Protects unit from bumps and ground shock.
  • Replaceable individual wheel spindles: Spindles can be replaced when damaged without replacing entire axle assembly.
  • Wheel options: Laminated tires: Eliminates flats; Air-filled tires: Give better cushion while transporting; Foam-filled tires: Give better cushion while transporting and can’t go flat.
  • LP Performance hitch option: Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
  • Bar-tite hitch option: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
  • Maintenance free tongue & axle pivots: Self lubricating journal bearings make for less maintenance.
  • Color coded hydraulic hose handles: Easy hose identification & sturdy handle to easily connect & disconnect from tractor.
  • 4 lip purgeable metal backed wheel hub seal: Seals make it harder for water & debris to enter the hub and grease to leave the hub. Metal backing prevents sticks and twine from destroying the seal lips. Greasable cast steel continuous hinge: Cast steel hinges make a strong connection & are easy to lubricate.
  • Galvanized decks on RCG: Durable rust protection for harsh conditions.
Specifications
  • Horsepower range: 50 - 160
  • Gearbox horsepower: 540 rpm or 1000 rpm, 160 hp Divider, 130 hp Center & Wings
  • Gearbox lubrication: Gear Lube 80-90W EP
  • Gearbox oil capacity: Splitter: 3.5 pints; Center deck & Wings: 6 pints
  • Cutting capacity: 3"
  • Machine total weight: 3,730 lbs.
  • Drawbar vertical load:1,240 lbs.
  • Blade tip speed At 540 rpm:15,500 FPM
  • Hitch types: Fixed Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch Hitch jack: Standard (7,000 lbs.)
  • Signal lights: LED
  • 7 Pin connector: SAE J560 pin configuration
  • Cutting width: 12'-0"
  • Overall width: 12'-10"
  • Transport width: 9’-4"
  • Overall length: 15'-3" (With center deck raised fully up)
  • Deck height: 11"
  • Cutting height: 1-1/2" - 14"
  • Lift hydraulics: 3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
  • Wing hydraulics: 2 1/2" x 12" hydraulic cylinders, hoses & fittings
  • Wing transport protection: Wing transport lock pins
  • Deck material thickness: 10 Gauge
  • Side skirt thickness: 1/4" Steel
  • Wing Deck: 1 Replaceable skid shoe per wing Skid shoes:
  • Center Deck: 2 Replaceable skid shoes Skid shoes:
  • Blades - 6 (2 per carrier): 1/2" x 4" Heat-treated Skid shoes:, free-swinging alloy steel with uplift
  • Blade overlap: 6"
  • Blade bolt: Keyed with hardened flat washer & locknut
  • Stump jumper / blade holder: 3/16" Thick round dish shaped pan, reinforced with 1" x 4" blade bar
  • Front & rear guards: Optional single row chain or dual row chain
  • Input driveline: 540 & 1000 rpm Cat. 6 with constant velocity u-joint with or without overrunning clutch
  • Intermediate driveline: Standard - Category 4 with slip-clutch
  • Wing drivelines: Standard - Category 4 with slip-clutch
  • Wheel options: 21" or 26" Laminated tires,; 25.5" New foam filled tires,; 25.5" New aircraft tires without foam filling
  • Number of wheels: 4 - Wheel option: Two on transport axle and one on each wing axl; 6 - Wheel option: Four on transport axle and one on each wing axle
  • Transport axle: Spring-cushioned on center transport axle
  • Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts,
  • Land Pride Performance hitch & BarTite hitch pivot shaft diameter: 2 1/4"
  • A-frame tongue: 5" x 3" rectangular

Specs

General

Working Width
12 ft.
Width
12 ft 10 in.
Length
15ft. 3 in.
Weight
3,730 lbs.
Recommended HP
50 - 160 hp

Related Products

Value Your Trade in 30 Seconds