Not Sure What You're Looking For?

2019 Land Pride RCF2084 Rotary Cutter

$4,157.00


Stock Image

Stock Image

New/Used
New
Availability
In Stock
Location
Olson Power & Equipment, Inc.
Primary Color
Orange
VIN
1341542
Stock #
24932
Title
Clean
Condition
Excellent
Year
2019
Manufacturer
Land Pride
Model
RCF2084 Rotary Cutter

Overview

Dealer Insights

New Land Pride RCF2084 Rotary Cutter for sale.

Image is a representative image and does not depict the exact unit for sale.

Description

The ideal cutter for rural grass maintenance - in a smooth top design. Smooth top for easier cleaning, ASABE Category 3 driveline, Fully-welded deck, Available rubber or chain guards - front and rear, High blade tip speed, 84" Features single or dual tailwheel option.

Features
  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
  • 5 Year gearbox warranty: Shows our confidence in the gearbox integrity.
  • Gearbox Seal Protection: Gearbox bottom seal protection for longer bearing life.
  • Cat. 4 driveline with 2-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
  • Dual position clevis type 3-point floating top link: Permits deck to follow the terrain for an even cut.
  • Lower clevis type 3-point hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
  • Heavy 10 gauge deck & side skirt construction: Can withstand more abuse than lighter gauge decks.
  • Box tubing deck supports: Makes for a stronger rigid deck.
  • Fully welded deck: Adds additional strength.
  • Extended cutter front: For increased material flow and added protection.
  • Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
  • 11 15/16" Deck Height: Allows cutter to handle heavy cutting conditions.
  • 1 1/2" to 12" Cutting height: Provides for a wide range of cutting conditions.
  • Full length skid shoes: Provides sidewall reinforcement and full protection to bottom of sidewall.
  • 1/2" x 4" Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
  • Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
  • 3/16" x 27" Oval stump jumper: Standard Oval stump jumper slides over stumps, rocks, and debris.
  • High blade tip speed: Ensures clean cut.
  • 15" Laminated tailwheel: Laminated material is long lasting in rough conditions. Can’t go flat.
  • 1 1/4" Heavy-duty spindle on tailwheel: Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
  • Optional Front Guarding: Protect against flying debris. Customer can choose to include single chain or rubber guarding.
  • Optional Rear Guarding: Protect against flying debris. Rear Metal Band is standard. Customer can choose to include single chain guarding.
  • Driveline Holder: Keeps driveline up out of dirt. Easier hook up of driveline.
Specifications
  • Model Number: RCF2084
  • Hitch :Category l & II with floating top linkage, Quick Hitch ready
  • Cutting Width: 84"
  • Overall Width: 89"
  • Overall Length:Singe Tailwheel: 133 1/4"; Dual Tailwheel: 126"
  • Deck Height (Bottom of Deck to Bottom of Skid Shoe): 11 15/16"
  • Cutting Height: 1 1/2" to 12"
  • Cutting Capacity: 2" Diameter
  • Recommended tractor hp: 45-90 hp
  • Power take-off speed: 540 rpm
  • Gearbox Ratio: 1:1.44
  • Gearbox Construction: Speed-up beveled gears, cast iron housing, 1 3/8"-6 spline input shaft and 2" output shaft
  • Gearbox Oil Capacity & Type: 7 Pints of EP 80-90W oil
  • Deck Construction: All welded deck
  • Deck Material Thickness: 10 Gauge (.134")
  • Side Skirt Material Thickness: 10 Gauge (.134")
  • Skid Shoes Standard:Full length weld-on skid shoes ; Accessory:1/4" x 2 1/2" x 18 7/16" Long bolt-on replaceable skid shoes (Bolts to weld-on skid shoes)
  • Stump Jumper: 3/16" x 27" Oval Pan with 1" thick blade holder bar
  • Blades (2): 1/2" x 4" x 31" Heat treated alloy steel free-swinging high lift
  • Blade Bolts: Keyed with harden flat washers & locknuts.
  • Blade Tip Speed: 17,113 FPM
  • Driveline: ASAE Category 4
  • Driveline Protection: 2 Plate slip clutch
  • Tailwheel Mount: Welded A-arm and caster fork with 360 degree swivel
  • Tailwheel: 4" x 8" x 15" Laminated tire with cast iron hub
  • Front Guard: Optional: Rubber Belting, Single Chain Guard
  • Rear Guard: Standard: Metal Band; Optional: Single Chain Guard
  • Machine Weight with Single Tailwheel: 1,047 lbs. with Front Rubber Guard and Rear Metal Band
  • Machine Weight with Dual Tailwheel: 1,155 lbs. with Front Rubber Guard and Rear Metal Band.

Specs

General

Working Width
84 in.
Width
89 in.
Length
133 1/4 in.
Weight
1,047-1,155 lb.
Recommended HP
45-90 hp

Related Products

Value Your Trade in 30 Seconds