Not Sure What You're Looking For?

2019 Land Pride WC1504 Wood Chipper


Stock Image

Stock Image

In Stock
Olson Power & Equipment, Inc.
Primary Color
Stock #
Land Pride
WC1504 Wood Chipper


Dealer Insights

New Land Pride WC1504 Wood Chipper for sale.

Image is a representative image and may not depict the exact unit for sale.


Land owners can utilize a Land Pride Wood Chipper and their subcompact tractor to quickly turn mountains of limbs into chips for mulch or just to aid in decomposition. Driven by the tractor's PTO, this unit features a self-feeding 4" cutting capacity, four reversible and replaceable hardened-steel knives, adjustable discharge chute, and direct drive to rotor. Adjustable support stands help elevate the Wood Chipper to match the height to your tractor's output shaft, enabling the driveline to remain straight and level.

  • Quick Hitch Adaptable: Quickly and easily attach chipper to tractor with one person.
  • 1/4" Thick Rotor Knife: Rotor features 4 replaceable 1/4" hardened steel cutting edges.
  • Rotor Knives Can Be Rotated When One Cutting Edge Is Worn: Each rotor knife has two cutting edges to extend rotor knife life. When one edge is worn, rotate rotor knife 180o to a new cutting edge. Less downtime required to sharpen rotor knives.
  • Rotor Knives Are Replaceable: Can replace rotor knives when all cutting edges are worn out.
  • 4-Bolt Flanged Bearings: Improves bearing life.
  • Cat. 4 Shear-Bolt Driveline: Shear-bolt protects the unit when obstructions are encountered.
  • Skid Extension Supports: Allows the unit to sit on the ground while keeping the driveline near level. Extends life of driveline u-joints.
  • Adjustable Rotating Discharge Chute With Rotation Stops: Directs direction wood chips will be discharged. Chute rotate stops keep the chute from discharging chips toward the operator feeding product toward the feed chute.
  • Adjustable Deflector Chute: Helps control the distance wood chips will be discharged away from the Wood Chipper.
  • Self-Feeding System: Product is pulled in by the sharp cutting edges with each pass of a rotor knife. Operator can be retrieving the next object to load while the unit is chipping the last limb loaded into the feed chute.
  • Horsepower Required: 20 to 50 hp (Minimum 35 hp for maximum capacity)
  • Weight: 450 lbs.
  • Main Frame Thickness: Cat. l w/ Quick Hitch capabilities
  • Rotor Housing Thickness: 3/16"
  • Driveline Category: 3/16"
  • Power Take-off Speed: Cat. 4 with shear bolt
  • Rotor Speed: 540 rpm
  • Rotor Size: 540 rpm (Direct Drive)
  • Chip Capacity: 25"
  • Hopper Inlet Opening: 4
  • Chipper Inlet Opening: 20" x 20"
  • Spout Discharge Opening: 10" x 4"
  • Rotor Knife: 5 1/4" Square
  • Number of Rotor Knives: Reversible and Replaceable
  • Rotor Knife Size: 4
  • Rotor Knife Material: 6" x 2" x 1/4"
  • Feed System: Hardened Steel (Specifically designed for chipping)
  • Feed Height Above Ground: Self-feed
  • Feed Height Adjustment: 24" to 30" With adjustable stands
  • Chip Chute Position: 6 Settings (Includes without adjustable skids)
  • Discharge Height: 58" to 64"
  • Color: Orange, Green & Beige



Chipping Capacity
4 in.
450 lb.
Recommended HP
20-50 HP

Related Products

Value Your Trade in 30 Seconds