Not Sure What You're Looking For?
2024 Land Pride RCF2072 Rotary Cutter
$4,012.00
Key Features
New/Used New
Availability
In Stock
LocationNORTH BRANCH, MN
Primary ColorOrange
Stock #
E003065
VIN
2238147
Condition
Excellent
Product Features
Dealer Notes
New Land Pride RCF2072 Rotary Cutter for sale.
Image is a representative image and does not depict the exact unit for sale.
Image is a representative image and does not depict the exact unit for sale.
Description
The RCF2060 & RCF2072 features a smooth top for easier cleaning and a floating top link for following ground undulations in grass, weeds, and light brush up to 2" in diameter. The RCF20 is ideal for rural acreage or farm grass maintenance. These cutters have a Category 1 3-Point hitch that are Quick Hitch adaptable. The standard ASAE Category 3 driveline is offered with either shear bolt or slip-clutch protection and the tailwheel is offered laminated or solid rubber.
Features and Benefits
- Surpassed rugged industry standards: All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
- 90 Hp gearbox: A rugged heavy built gearbox capable of handling heavy cutting applications.
- 5 Year gearbox warranty: Shows our confidence in the gearbox integrity.
- Cat. 4 driveline with 2-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
- Cat I or Cat II Hitch Quick-Hitch Capability: Permits deck to follow the terrain for an even cut.; Quick-Hitch provides for fast hook-up.
- Lower clevis type 3-point hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
- 84" Cutting width: Wide cutting width, Reduces cutting time in the field.
- Heavy 10 gauge deck construction: Can withstand more abuse than lighter gauge decks.
- Fully welded deck: Adds additional strength.
- Box tubing deck supports: Makes for a stronger rigid deck.
- Extended cutter front: For increased material flow and added protection.
- Round back design: Helps discharge grass better than enclosed or partially enclosed cutter.
- 9 1/2" Deck Height: Allows cutter to handle heavy cutting conditions.
- 2" to 11" Cutting height: Provides for a wide range of cutting conditions.
- 1/4" x 2 1/2" Full length skid shoes: Provides sidewall reinforcement and full protection to bottom of sidewall.
- Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
- 1/2" x 4" Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
- 10 Gauge stump jumper: Standard oval stump jumper slides over stumps, rocks, and debris.
- High blade tip speed: Ensures clean cut. (17,113 FPM)
- 2" Cutting capacity: Can aid in cleaning brush
- Available with single or dual tailwheels: Dual tailwheels offer greater stability in uneven terrain.
- 15" Laminated tailwheel: Laminated material is long lasting in rough conditions.
- Heavy-duty spindle on tailwheel: Tailwheels take a beating, 1 1/4" spindle gives the strength to protect tailwheel assembly.
- Guarding: Protect against flying debris. Customer must choose to include chain or rubber on the front and rear. Rear Metal Band standard.
- Driveline Holder: Keeps driveline up out of dirt. Easier hook up of driveline.
Specifications & Capacities
- Machine Weight: 745 lb. (337.9 kg)
- Hitch: Category l with floating top linkage, Quick Hitch ready
- Cutting Width: 72" (1.83 m)
- Overall Width: 77" (1.96 m)
- Overall Length: 109 1/2" (2.78 m)
- Deck Height (Bottom of Deck to Bottom of Skid Shoe): 11" (27.9 cm)
- Cutting Capacity: 2" (5.1 cm) Diameter
- Cutting Height: 1 1/2" to 12" (3.8 cm to 30.5 cm)
- Recommended Tractor Horsepower: 20-65 HP (14.9-48.5 kw)
- Gearbox Ratio: 1:1.47
- Power Take-Off Speed: 540 rpm
- Gearbox Construction: Speed-up beveled gears, cast iron housing,; 1 3/8" (3.5 cm) - 6 spline input shaft and 2" (5.1 cm) output shaft
- Gearbox Lubrication: EP 80-90W oil
- Gearbox oil Capacity: 4 Pints (1.89 L)
- Deck Construction: All welded deck
- Deck Material Thickness: 10 Ga. (.134") (3.4 mm)
- Side Skirt Material Thickness: 10 Gauge (.134")(3.4 mm)
- Skid Shoes Standard: Full length weld-on skid shoes
- Blades (2): 1/2" x 3" x 31" (13 mm x 7.6 cm 78.7 cm); Heat treated alloy steel free-swinging high lift
- Blade Bolt: Keyed with harden flat washer and locknut
- Blade Tip Speed: 14,955 FPM (76.0 mps)
- Driveline: ASAE Category 3
- Driveline Protection: Optional: Shearbolt protection; 2 Plate slip clutch
- Tailwheel Mount: Welded A-arm and caster fork with 360 degree swivel
- Tailwheel Optional: 4" x 8" x 15" Laminated tire with cast iron hub; 4" x 16" Molded rubber tire
- Rear Guard: Standard: Metal Band
- Front Guard: Optional: Rubber Guard; Single Chain Guard
- Skid Shoes Accessory: 1/4" x 2 1/2" x 18 7/16" (6 mm x 6.4 cm x 46.8 cm) Long bolt-on replaceable skid shoes (Bolts to weld-on skid shoes)
- Stump Jumper: 10 GA. x 24" (3.4 mm x 61.0 cm) Round Pan with 1" (2.5 cm) thick blade holder bar
- Rear Guard Optional: Rubber Belting; Single Chain Guard
General
| Working Width | 72 in. (1.83 m) |
| Width | 77 in. (1.96 m) |
| Length | 109 1/2 in. (2.78 m) |
| Weight | 745 lb. (337.9 kg) |
| Recommended HP | 20 - 65 HP (14.9-48.5 kW) |
