Not Sure What You're Looking For?
2024 Land Pride RCF2084 Rotary Cutter
Call for Price
Key Features
New/Used New
Availability
In Stock
LocationNORTH BRANCH, MN
Primary ColorOrange
Stock #
E001065
VIN
2183907
Condition
Excellent
Product Features
Dealer Notes
New Land Pride RCF2084 Rotary Cutter for sale.
Image is a representative image and does not depict the exact unit for sale.
Image is a representative image and does not depict the exact unit for sale.
Description
The Land Pride smooth-top RCF2084 Rotary Cutter will quickly tackle pastures and light brush with its 84" cutting width and 2" cutting capacity. The floating top link permits the deck to follow the terrain for an even cut. This cutter has a Category I and II 3-Point hitch that is Quick Hitch adaptable. The standard ASAE Category 4 driveline is offered with 2-plate slip-clutch to protect your cutter investment.
Features and Benefits
- Surpassed rugged industry standards: All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
- 5 Year gearbox warranty: Shows our confidence in the gearbox integrity.
- Gearbox Seal Protection: Gearbox bottom seal protection for longer bearing life.
- Cat. 4 driveline with 2-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
- Dual position clevis type 3-point floating top link: Permits deck to follow the terrain for an even cut.
- Lower clevis type 3-point hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
- Heavy 10 gauge deck & side skirt construction: Can withstand more abuse than lighter gauge decks.
- Box tubing deck supports: Makes for a stronger rigid deck.
- Extended cutter front For increased material flow and added protection.
- Fully welded deck Adds additional strength.
- Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
- 11 15/16" Deck Height: Allows cutter to handle heavy cutting conditions.
- 1 1/2" to 12" Cutting height: Provides for a wide range of cutting conditions.
- 1/2" x 4" Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
- Full length skid shoes: Provides sidewall reinforcement and full protection to bottom of sidewall.
- Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
- 3/16" x 27" Oval stump jumper: Standard Oval stump jumper slides over stumps, rocks, and debris.
- High blade tip speed Ensures clean cut.
- 15" Laminated tailwheel: Laminated material is long lasting in rough conditions. Can't go flat.
- 1 1/4" Heavy-duty spindle on tailwheel: Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
- Optional Front Guarding: Protect against flying debris. Customer can choose to include single chain or rubber guarding.
- Optional Rear Guarding: Protect against flying debris. Rear Metal Band is standard. Customer can choose to include single chain guarding.
- Driveline Holder: Keeps driveline up out of dirt. Easier hook up of driveline.
Specifications & Capacities
- Machine Weight Single Tailwheel: 1,047 lbs. with Front Rubber Guard and Rear Metal Band.
- Machine Weight Dual Tailwheel: 1,155 lbs. with Front Rubber Guard and Rear Metal Band.
- Cutting Width: 84"
- Hitch: Category l & II with floating top linkage, Quick Hitch ready
- Overall Width: 89"
- Overall Length Singe Tailwheel: 133 1/4"
- Overall Length Dual Tailwheel: 126"
- Deck Height (Bottom of Deck to Bottom of Skid Shoe): 11 15/16"
- Cutting Height: 1 1/2" to 12"
- Cutting Capacity: 2" Diameter
- Power take-off speed: 540 rpm
- Recommended tractor hp: 45-90 hp
- Gearbox Ratio: 7.11111111111111E-04
- Gearbox Construction: Speed-up beveled gears, cast iron housing, 1 3/8"-6 spline input shaft and 2" output shaft
- Gearbox Oil Capacity & Type: 7 Pints of EP 80-90W oil
- Deck Construction: All welded deck
- Deck Material Thickness: 10 Gauge (.134")
- Side Skirt Material Thickness: 10 Gauge (.134")
- Skid Shoes Standard: Full length weld-on skid shoes
- Skid Shoes Accessory: 1/4" x 2 1/2" x 18 7/16" Long bolt-on replaceable skid shoes (Bolts to weld-on skid shoes)
- Stump Jumper: 3/16" x 27" Oval Pan with 1" thick blade holder bar
- Blades (2): 1/2" x 4" x 31" Heat treated alloy steel free-swinging high lift
- Blade Bolts: Keyed with harden flat washers & locknuts.
- Blade Tip Speed: 17,113 FPM
- Driveline: ASAE Category 4
- Driveline Protection: 2 Plate slip clutch
- Tailwheel Mount: Welded A-arm and caster fork with 360 degree swivel
- Tailwheel: 4" x 8" x 15" Laminated tire with cast iron hub
- Front Guard Optional: Rubber Belting; Single Chain Guard
- Rear Guard Standard: Metal Band; Single Chain Guard
General
| Working Width | 84 in. |
| Width | 89 in. |
| Length | 133 1/4 in.; Dual Tailwheel: 126 in. |
| Weight | 1,047 lb. |
| Recommended HP | 45-90 HP |
