2024 Land Pride RCR1272 Rotary Cutter

Call for Price

Key Features

New/Used New

Availability In Stock

LocationNORTH BRANCH, MN

Primary ColorOrange

Stock # 42079

VIN 2003763

Condition Excellent

Product Features

Dealer Notes

New Land Pride RCR1272 Rotary Cutter for sale.

Image is a representative image and does not depict the exact unit for sale.

Overview

Description

The RCR12 Series Rotary Cutters from Land Pride is an economical solution to grass maintenance on farms, rural areas, or vacant lots. The 1" cut capacity makes it a good solution for rough-cut areas that have small saplings and weeds. The RCR12 is a good match for a subcompact or compact tractor up to 60 HP and features a fully-welded deck and a 24" stump jumper.

Features and Benefits

Surpassed rugged industry standards: All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
Tractor HP range: 18 - 60 HP
3 Year gearbox warranty: Shows our confidence in the gearbox integrity.
Cat. 3 driveline with shearbolt: Shear bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
Floating top link: Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors.
Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
1 1/4" - 10" Cutting Height: Cutting height for wide range of cutting conditions.
Skid shoes (Accessory) RCR1260 & RCR1272: Provides sidewall reinforcement and helps protect bottom of sidewall.
1/2" x 3" Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
10 Gauge stump jumper: Allows cutter to slide over obstructions protecting the gearbox output shaft.
High blade tip speed: Ensures clean cut.
Laminated tailwheel: Laminated material is long lasting in rough conditions and can't go flat.
Heavy-duty spindle on tailwheel: 1 1/4" spindle gives the strength to protect tailwheel assembly.
Rubber guarding: Protect against flying debris.
Metal Guarding: Protects against flying debris.

Specifications & Capacities

Weight (With front & rear guard, shear bolt driveline & laminated tire): 568 lbs. (258 kg)
Hitch: Category l (Quick hitch ready)
Cutting Width: 72" (1.83 m)
Overall Width: 76 1/2" (1.94 m)
Overall Lengt (Including Tailwheel): 110" (2.79 m)
Deck Height: 7 1/4" (18.4 cm)
Cutting Height: 1 1/4" - 10" (3.2cm. - 25.4 cm)
Cutting Capacity: Grass, weeds & light brush
Recommended Tractor Horsepower: 25 -60 hp (18.6-44.7 kw)
Power Take-Off Speed: 540 rpm
Gearbox Rating Horsepower: 60 hp (44.7 kw)
Gearbox (Speed up beveled gears): 1:1.47 Speed-up Cast iron housing
Gearbox Lubrication & Capacity: 1.9 Pint (.9 L) With new Comer gearboxes - 1.1 Pint (0.52 L) of gear lube 80-90W EP
Deck Construction: 2 Piece reinforced deck
Deck Material Thickness: 12 Gauge (2.7 mm)
Skids: 1/4" (6.35 mm) (Welded on deck)
Stump Jumper: Round Pan 10 ga x 24" (61.0 cm)
Skid Shoes: Bolt-on replaceable skid shoes (Sold separately through parts department only)
Blades (2): 1/2" x 3" (13mm x 76 mm) Heat treated alloy steel Free-swinging blades
Blade Bolts: Keyed with harden flat washer and locknut
Blade Tip Speed: 15,033 fpm (76.4 mps)
Driveline: ASAE Category 3
Driveline Protection Options: 1/2" (13 mm) Center shear bolt protection or center bolt 2 plate slip clutch
Tailwheel: 4" x 8" Laminated tire and yoke
Safety Guards: Rubber (standard front and rear)