Not Sure What You're Looking For?
2024 Land Pride SB1064 Snowthrower
$4,970.00
Key Features
New/Used New
Availability
In Stock
LocationNORTH BRANCH, MN
Primary ColorOrange
Stock #
E002143
VIN
2228246
Condition
Excellent
Product Features
Dealer Notes
New Land Pride SB1064 Snowthrower for sale.
Image is a representative image and does not depict the exact unit for sale.
Image is a representative image and does not depict the exact unit for sale.
Description
Land Pride's SB10 Series Snow Blowers remove snow from driveways, parking lots, and sidewalks. The adjustable chute and deflector allow the operator to direct the snow where desired. With optional electric or hydraulic adjustments, the operator can stay on the tractor and rotate the chute as needed. The optional front cutting edge and inner or outer depth shoes can be purchased with all models to increase the life of the units.
Features
- Quality Comer Gearbox: Provides long life, durability construction.
- Greasable Bearings: Less drag and extends life of unit.
- Adjustable 3-point Hitch: Operator may set the distance between tractor and Snow Blower to his/her preference.
- Quick Hitch Compatible: Makes for faster and easier hook-up to tractor.
- Large Main Housing: Ability to handle large drifts.
- Large Impeller Diameter: The ability to move and throw material farther.
- Guarded Discharge Chute: Guards against operator putting his or her hands into the impeller
Options
- Bolt-on Reversible Lower Wear Bar: Protects against wear on the auger housing and improves service life of the Snow Blower. The optional hardened steel wear bar last longer.
- Gear Driven Chute Rotator: Allows Choice Of Three Rotator Options: manual drive, electric actuator, or hydraulic motor.
- Shearbolt Protected Impeller And Auger: Eliminates costly repairs.
- Three Skid Shoe Options: Multiple surfaces allows you to pick the correct skid shoe for your application
Specifications
- Working Width: 64" (1.63 m)
- Overall Width With Inner Skid Shoes: 65 3/4" (1.67 m)
- Weight Without Options: 494 lbs. (224.1 kg)
- Tractor Horsepower: 18-59 hp (13.4-44 kW)
- 3-point Hitch: Adjustable Cat. l
- Quick Hitch Compatible: yes
- Main Housing Material: 12 Gauge (2.7 mm)
- Side Plate Material: 3/16" (5 mm)
- Chute Opening At The Base: 8" (20.3 cm)
- Impeller Diameter: 20" (50.8 cm)
- Impeller Housing Depth: 6" (15.2 cm)
- Number Of Impeller Blades: 4
- Number Of Auger Paddles: 4
- Auger Diameter: 14" (35.6 cm)
- Gearbox Oil Capacity & Type: 1.06 (.50 L) Pints of SAE90W Gearlube
- Drive Chain: #60 RC
- Driveline Category: Cat. ll, Shearbolt protected
- Driveline Shearbolt: M8 x 50 C1.6.6
- Drive Shaft Shearbolt: 1/4" -20 Grade 5 bolt
Optional Equipment
- Lower Wear Bar Construction: Bolt-on, Reversible, And Replaceable Full Length Lower Wear Bar, Two Options Available: Hardened steel wear bar option or steel wear bar option
- Lower Wear Bar Weight: 14 lbs. (6.4 kg)
- Outer Skid Shoe & Weight: Bolt-on, adjustable & replaceable 8 lbs (3,6 kg)
- Outer Wear Bar & Weight: Bolt-on, adjustable & replaceable 14 lbs (1,8 kg)
- Inner Skid Shoe & Weight: In-board mounted on the rear, adjustable and replaceable 19 lbs (8,6 kg)
- Optional Chute Rotation & Weight, Manual: Gear & worm drive 10 lbs. (4.5 kg)
- Optional Chute Rotation & Weight, Electric: Gear drive 20 lbs. (9,1 kg)
- Optional Chute Rotation & Weight, Hydraulic: Gear drive 12 lbs (5,4 kg)
- Optional Deflector Type & Weight, Manual: Lock bar 2 lbs. (0,9 kg)
- Optional Deflector Type & Weight: Electric actuator 25 lbs. (11,3 kg)
- Optional Deflector Type & Weight: Hydraulic cylinder 32 lb (14,5 kg)
General
| Recommended HP | 18 - 59 HP (13.4-44 kW) |
| Working Width | 64 in. (1.63 m) |
| Width | 65 3/4 in. (1.67 m) |
| Weight | 494 lb. (224.1 kg) |
