Not Sure What You're Looking For?
2024 Land Pride STB1072
Call for Price
Key Features
Availability
Brochure
Year2024
MakeLand Pride
ModelSTB1072
Product Features
Description
The STB1060 & STB1072 Snow Trip Blades are designed to fit tractor loaders. The STB10 is available in 5' and 6' widths for tractors with loaders in the 25-40 HP range. The 10 Series Model has a 21" curved moldboard.
Features & Benefits
- Reinforced 12 Gauge Moldboard Design: Provides added strength and durability.
- 72" Working Width: Allows customers to choose the blade that meets their operational needs.
- Double-acting Angling Cylinder (single & Dual): Easily enables up to 30 degrees of angling to left or right distributing the load where you want it to go.
- Trip Design With Springs: Protects the structural integrity of the blade while still maintaining load control no matter what the bottom edge encounters.
- Easy-attaching Mounting System: Adapted for tractor loaders with quick-attach front mounting plates.
- Skid Shoes: Offered as standard equipment. Establish lower limits of blade operation to prevent surface gouging or cutting too deep. Also provides protection to the moldboard as cutting edge wears.
- Replaceable Bottom Wear Edge: Offered in steel or heavy-duty poly construction to match ground & surface operating conditions.
- Blade Marker: Provides operator with improved awareness and visibility of outermost edges of the blade to prevent unwanted contact with ground obstacles.
- Locking System: Allows for light blading.
- Optional Top-mounted Rubber Deflector: Helps prevent snow from over-topping the moldboard in deeper snow conditions.
- Cushion Valve: Helps protect the moldboard and cylinders in the event an obstruction is hit, by allowing hydraulic fluid to bypass the cushion valve and flow back to the tractor
Specifications & Capacities
- Tractor Horsepower: 25 to 40 hp
- Moldboard Thickness: 12 Ga.
- Blade Width (maximum Cutting Width): 72"
- Cutting Width @ 30o Angle: 62"
- Moldboard Height (with Blade): 22"
- Maximum Blade Angle: 30 deg. left; 30 deg. right
- Angle Cylinder Size: 2" bore x 6" stroke
- Maximum Hydraulic Pressure: 3000 psi
- Cutting Edge (Steel & Poly): 1/2" x 6" replaceable & reversible
- Trip Release Pressure: 600 lbs
- Base Unit Weight With Steel Cutting Edge: 390 lbs.
- Base Unit Weight with poly cutting edge: 403 lbs.
General
| Cutting Width | Straight: 72 in.; at 30 deg.: 62 in. |
| Moldboard Height | 22 in. |
| Blade Angling | 30 deg. left; 30 deg. right |
| Weight | Steel Cutting Edge: 390 lb.; Poly Cutting Edge: 403 lb. |
